Requirements:
Hardware: MINI-VCI Firmware V1.4 or MINI-VCI Firmware V2.04
Software: Techstream V13.00.022
| 1.0 | Download and Unzip Software Files | mvci-x64.reg Toyota TIS 13.00.022.rar MVCI Driver 32bit.rar MVCI Driver 64bit.rar TISKEY.rar UNZIP all above files with winrar version 5.xx or above. Assume user keep above files in D:\TOYOTA |
| 1.1 | Install USB driver (Windows 32bit): | Connect MVCI cable to your car's OBDII interface, turn car key to ignition on, Run "d:\toyota\MVCI Driver 32bit\MVCI Driver for TOYOTA.exe" Click [Next] Click [Next] Click [Install] Click [Finish] Driver installed. |
| 1.2 | Install USB driver (Windows 64bit): | Run file manager, Go into C:\Program Files (x86) Create a new folder "XHorse Electronics" Go inside "XHorse Electronics" folder, create a new folder "MVCI Driver for TOYOTA TIS" Copy all files inside "d:\toyota\MVCI Driver 64bit" to C:\Program Files (x86)\XHorse Electronics\MVCI Driver for TOYOTA TIS Plug the MINI VCI cable to the USB port Open control panel Run device manager, Update driver from folder C:\Program Files (x86)\XHorse Electronics\MVCI Driver for TOYOTA TIS. You should now see two new devices: [Universal Serial Bus Controllers\USB Serial Converter] and [Ports (COM & LPT)\USB Serial Port (COM)] |
| 1.3 | Interface firmware version check: (Firmware Update tool DOES NOT work with Windows 10) | Run the FirmwareUpdateTool.exe from the "C:\Program Files (x86)\XHorse Electronics\MVCI Driver for TOYOTA TIS". Click ¡§Device Info¡¨. You should see the ¡§device connected¡¨: If you see this, it means your MINI VCI is up and running under Windows x64 Interface can be used by programs such as "Techstream" now. |
| 2.1 | Install Techstream Part 1: | Run Toyota Techstream 13.00.022.exe Welcome to the Installshield Wizard for Techstream Software Click [Next] Choose Setup Langue: Any language you prefer Click [Next] Click [I Accept the terms of the license agreement] Click [Next] User Name: penghualin Company Name: penghualin Click [Next] Click [Install] Click [Finish] Now icon [Techstream] appears on desktop. |
| 2.2 | Install Techstream Part 2: | Copy "d:\toyota\Toyota TIS 13.00.022\key\MainMenu.exe" Right click icon [Techstream] on desktop. Click [Property], Click [Find Target],or Open File Location] Paste to replace the original "C:\Program Files(x86)\Toyota Diagnostics\Techstream\bin\MainMenu.exe". Copy "d:\toyota\Toyota TIS 13.00.022\key\Techstream.exe" Right click icon [Techstream] on desktop. Click [Property], Click [Find Target],or Open File Location] Paste to replace the original "C:\Program Files(x86)\Toyota Diagnostics\Techstream\bin\Techstream.exe". Do not run techstream yet. |
| 2.3 | Hardware Registry (XHorse MVCI ) | From file manager, drag the d:\toyota\TISKEY\IT3System.ini into "C:\Program Files (x86)\Toyota Diagnostics\Techstream\Env\" When prompted, overwrite the preexisting file with the new one you are dragging over. Mouse right click on d:\toyota\mvci-x64.reg Select [merge] Run Techstream shortcut from the desktop. Click [Setup] Click [VIM Select] Select [XHorse - MVCI] Click [OK] If only [TIS Techstream VIM] is available to select, Close the Techstream software, repeat above steps. Click [OK] Click [OK] |
| 2.4 | Software Registration/Activation | Run Techstream software on desktop Click [Techstream Configuration]: Area Selection = Select your Area Click [Next] Default Language Selection = [English] or select your language Click [Next] Enter any of the dealer info and Click [Next] Click [Connect to Vehicle] Copy universal serial number for any AREA into [New key] column: 1111111111111111111111111111111150001511111111 Click [OK] |
| 3.0 | Diagnosis of your car | Go to [Setup] on the main menu, then click [VIM Select]. For the Interface setup, select [Xhorse - MVCI] from the pull down menu. Click [OK] Click [Connect to Vehicle] in Techstream. Initialize USB Communication..... If everything works, you will be prompted to confirm car year/model. After which you'll get to the diagnostic interface. Usually [Model Code] is detected automatically for cars made after 2003. Vehicle Connection Wizard : select vehicle information Click [Next] Select engine module and the function you want to carry out. |