LS1 to LS2 Cam Extension Harness Info : OBD Innovations

LS1 to LS2 Cam Extension Harness Info (LS2 Swap into LS1 Car) Print

Modified on: Tue, Aug 21, 2018 at 4:00 PM

SKU: KNOCK-CAM-EXT-HARNESS-LS1-LS2

Issue:

I’m getting the error code P0343 which is the cam position sensor. My engine harness is for an LS1 and my engine swap is an LS2 so any chance wires in this harness need to be swapped or re-wired? Cars starts but not getting the correct RPM and error code.

Possible Solution:

Swapping the 2 outer wires of the CAM sensor. Apparently these must be swapped when going from an LS1 to LS2.

Did you find it helpful? Yes No

LS1 to LS2 Cam Extension Harness Info (LS2 Swap into LS1 Car) Print

Related Articles